The position of the switching point can be up to 80 m away from the installation site. The smooth surface of the vibrating rod, without sharp corners or edges, prevents bulk material from getting stuck or jammed and is easy to clean.
The VEGAVIB 62 is a level switch for granular and coarse-grained bulk solids. The optimized rod design without corners and edges avoids jamming of the bulk solids and is easy to clean. The VEGAVIB 62 detects reliably and accurately the min. or max. limit level in bulk solids. The position of the switching point is specified flexibly through the length of the suspension cable.
Specification
VEGAVIB 62
Process temperature
-40 ... 150 °C [°C - °F]
Process pressure
-1 ... 6 bar [Bar - kPa - psi]
Version
Detection of solids in water
Suspension cable
Materials, wetted parts
316L
FEP
PUR
Housing material
Plastic
Aluminium
Stainless steel (precision casting)
Stainless steel (electropolished)
Output
Relay (DPDT)
Contactless electronic switch
Transistor (NPN/PNP)
Two-wire
NAMUR
Protection rating
IP66/IP68 (0,2 bar)
IP66/IP67
IP66/IP68 (1 bar)
Threaded connection
≥ G1, ≥ 1 NPT
Flange connection
≥ DN 32, ≥ 1½"
Seal material
CR, CSM
Ambient temperature
-40 ... 80 °C
Display & adjustment
Indication
Pluggable display module PLICSLED
Grit trap
Point level detection in a grit trap
Water inlet at the reservoir
Level measurement and point level detection of stones and sand in the water basin
Raw material silo in the ethanol plant
Level measurement and point level detection in the grain silo